Tele- Health Monitoring System
Navya Sajan, ADISHANKARA INSTITUTE OF ENGINEERING AND TECHNOLOGY, KALADY; Sarath A R ,ADISHANKARA INSTITUTE OF ENGINEERING AND TECHNOLOGY, KALADY; Sneha George ,Adi Shankara Institute of engineering and Technology
IOT, Temperature Sensor, Heartbeat Sensor, Oscillator, USART
Aim of this project is to inform doctor about a patient’s condition, who is bedridden at home, on his portable computer or tablet. It is really expensive to admit the bedridden patient in hospital for a very long duration of time. This project gives a gadget which will persistently screen the indispensable parameters, for example heartbeat blood pressure, temperature of patient and do information logging ceaselessly. If any parameter crosses a safe minimal level, then an alert will be sent to the doctor by means of wifi and emergency actions would take place accordingly. In the event that any parameter crosses safe minimal level, this unit additionally raises an alert, furthermore speaks with the concerned specialist by the method of sending SMS through IOT based system. A patient observing programming application is actualized to store information that can be later downloaded to a doctor's workstation for investigation and finding.
-
[1] M. B. I. Reaz “Tele Health ECG monitoring System: A low cost Approach” International Islamic University Malaysia, Kuala Lumpur.
[2] Mohammad Fezari, Mounir Boubia Salah and Moldi Bedda “Microcontroller Based Heart Rate monitor” The International Arab Journal of Information Technology, Vol. 5, No. 4, October 2008.
[3] R S Khandpur, a handbook on Biomedical Instrumentation.
[4] M Chaitanya Suman, K Prathyusha “Wireless ECG System based on ARM LPC 2103 Processor” IJECT Vol 3, Issue 1,Jan- March 2012,ISSN: 2230-7109(online).
[5] R Kumar “An IoT based patient monitoring system using raspberry pi” IJECS Volume 05 Issue 3 March 2016 Page No.16018-16021.
Paper ID: GRDCF004021
Published in: Conference : National Conference on Emerging Research Trend in Electrical and Electronics Engineering
Page(s): 101 - 104
Published in: Conference : National Conference on Emerging Research Trend in Electrical and Electronics Engineering
Page(s): 101 - 104