Comparative Study of Flat Slab and Conventional Slab using Software Aid
Anghan Jaimis, S.S.A.S.I.T, Surat, Gujarat, India; Mitan Kathrotiya ,S.S.A.S.I.T, Surat, Gujarat,India; Neel Vagadia ,S.S.A.S.I.T, Surat, Gujarat,India; Sandip Mulani ,S.S.A.S.I.T, Surat, Gujarat,India
Building, flat-slab, seismic, storey height, parametric beams, weight reduction
Configuration of building is very much important for good seismic performance of the building. The important aspects affecting seismic configuration of a building are overall geometry, structural system and load part. Those parameters are behaving different way in flat slab structure and conventional slab structure. Research on the design of structure has started not only India but in other developed countries also. The building still damages due to some or other reasons due to earthquake. In spite of all the weakness in the structure either code imperfection or error in analysis and design, the structure configuration system has played a vital role in Calamity. In general normal frame construction utilize column, slab and beam .however it may be possible undertake construction without providing beams, in such a case the frame system would consist a slab and column without beam. In our study it has been planned to analyses a building having flat slab and conventional slab under the effect of various loading conditions. The focus of our project is to compare the behavior of building having flat slab and having conventional slab using software aid.
-
[1] B.G. Birajdar & S.S. Nalawade (2004), “Seismic Analysis of Buildings Resting on Sloping Ground” 13th World Conference on Earthquake Engineering, Vancouver, B.C., Canada, Paper No. 1472.
[2] Dhiman Basu and Sudhir K. Jam (2004), “Seismic Analysis of Asymmetric Buildings with Flexible Floor Diaphragms”, Journal of Structural Engineering, Vol. 130, No. 8, pp. (1169-1176).
[3] Fuji, K., Nakano, Y. and Sanada, Y. (2004), “Simplified Nonlinear Analysis Procedure for Asymmetric Buildings”, Proc. of the 13th World Conference on Earthquake Engineering, Vancouver, Canada, Paper No. 149
[4] Agarwal. P. and Shirkhande.M, “Earthquake resistant Design of Structures” Printice- Hall of India Private Ltd. New Delhi, India.
[5] B.C. Punmia, Ashok Kumar Jain, Arun Kumar Jain (2003), “Soil Mechanics and Foundations”, Published by Laxmi Publications (P) Ltd.
[6] Apostolska1 R.P and Necevska-Cvetanovska G. S, “Seismic performance of flat-slab building structural systems” The 14th World Conference on Earthquake Engineering October 12-17, 2008, Beijing, China.
[7] Bhavikatti S.S, “Advance R.C.C. Design” , New Age International (p) Limited, Publishers, New Delhi, India.
[8] Ema COELHO, Paulo CANDEIAS, Raul ZAHARIA and Artur V. PINTO, “Assessment of the seismic behaviour of R C flat slab building structures”, 13th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1-6, 2004 Paper No. 2630
[9] Lan N .Robertson, “Analysis flat slab structures subjected to combined lateral and gravity load”, ACI Structural Journal.
[10] Pankaj Agarwal and Manish Shrikande (2007), “Earthquake Resistant Design of Structures”, Prentice Hall of India Private Limited, New Delhi, India.
[11] Shyh-jiann Hwang and Jack p. moehle, “Models for laterally loaded slab-column frames”, ACI Structural Journal, March-April 2000.
I.S. CODES
[12] IS 1893(Part 1):2002 - Criteria for Earthquake Resistant Design of Structures, BIS, New Delhi
[13] IS 4326:1993 - Earthquake Resistant Design and Construction of Buildings - Code of Practice, BIS, New Delhi
[14] IS 456:2000 - Plain and reinforced concrete – Code of Practice, BIS, New Delhi.
Paper ID: GRDCF001046
Published in: Conference : Recent Advances in Civil Engineering for Global Sustainability (RACEGS-2016)
Page(s): 230 - 237
Published in: Conference : Recent Advances in Civil Engineering for Global Sustainability (RACEGS-2016)
Page(s): 230 - 237