Optimization of Machining Parameters for Al Material with the use of End Mill Cutter
Manish Patil, Jaihind college of engineering , kuran , pune; Prof. Hredya Mishra ,Jaihind college of engineering , Pune
Cutting Speed, Depth of Cut, Feed, Response Surface Design, Surface Roughness Etc.
Surface finish and material removal rate are two important factors in the manufacturing which affect acceptability of the product which in turn reflects on the profitability of the organization. The worth of the production setup to produce the components with high material removal rate (MRR) without sacrificing the surface requirements can play vital role in sustainability and profitability of the organization. In this paper, the effect of process parameters on metal removal rate and surface roughness has been investigated in milling of AL material with Carbide end mill cutter. Cutting speed, feed and depth of cut have been taken as input factors in three level response surface methodologies used for experimentation. Mathematical models have been developed using response surface methodology to predict surface finish, and metal removal rate in term of machining parameters. Depth of cut and feed rate are found to be a dominant parameter for surface roughness; whereas feed rate mainly affects the metal removal rate.
-
[1] Depak Kumar et al. (2015). Optimization of surface roughness and flatness in end milling of aluminum alloy 6063 –T6,Internation journal of advance in Engineering and technology , Vol.8, Issue6, pp.937-949
[2] N.S.V.N Hanuman et al(2017) On modeling the CNC end milling characteristics of AL-7075/WC Powder metallurgy composite, International conference on functional materials , characterization, solid state physics , power , Thermal and combustion energy. , AIP 179
[3] Kanan S et al (2016).Selection of machining parameter of face milling operation for aluminum with HSS cutter using Response surface methodology and Genetic algorithm., Journal of advance in chemistry Vol-12, pp.4938-4949
[4] S.Jeyakumar et al (2015). Optimization of machine parameter of AL6061composite to minimize the surface roughness –modeling using RSM and ANN , Indian Journal of engineering and material science , Vol.22, pp.29-37
[5] D.Bhnau Prakash et al. (2013). Optimization of machine parameter for aluminum alloy 6082 in CNC end milling , International journal of engineering research and applications , vol.3, issue-1, pp.505-510
Paper ID: GRDJEV02I060166
Published in: Volume : 2, Issue : 6
Publication Date: 2017-06-01
Page(s): 242 - 248
Published in: Volume : 2, Issue : 6
Publication Date: 2017-06-01
Page(s): 242 - 248