Study of Application of Six Sigma of DMAIC in Dent Minimization in Gear Manufacturing
Chandrashekhar Sunil More, Suman Ramesh Tulsiani’s Technical campus, Faculty of Engineering; Ankush Anil Nerkar ,Suman Ramesh Tulsiani’s Technical campus, Faculty of Engineering; Rudresh Vilas Khonde ,Suman Ramesh Tulsiani’s Technical campus, Faculty of Engineering; Srikant Tilekar ,Suman Ramesh Tulsiani’s Technical campus, Faculty of Engineering
Six Sigma, DMAIC, Gear Box, Dent, Quality Improvement
DMAIC is a Data-driven quality strategy used to improve processes. It is an integral part of a Six Sigma initiative, but in general can be implemented as a standalone quality improvement procedure or as part of other process improvement initiatives such as lean Technology. The present paper deals with application of six sigma for gear box system for dent minimization purpose. The various problems which lead to Gear box rejections such as Noise, Leakage, Damages, Assembly jam were studied in details for period of 2013-2016. All the parameter of DMAIC technology such as Define, Measure, Analyze, improve & Control were applied to above stated problem. The given study found that the Dent Minimization has been successfully carried out and has a satisfactory effect and can be a promising factor to improve future quality issues.
-
[1] Dalgobind Mahto ;Anjani Kumar “Application of root cause analysis in improvement of product quality and productivity”, Journal of Industrial engineering and management – 01, National Institute of Technology (INDIA) dec2008
[2] S. Kombogiannis, A. Antoniadis, N. Vidakis “Gear Hobbing Cutting Process Simulation and Tool Wear Prediction Models”, Aristoteles University, Thessaloniki 54006,Greece Aug 2002
[3] John P. Dugas, “Gear Finishing by Shaving, Rolling & Honing - Part I”, Dudley’s Gear Handbook, 2nded.,Dennis P. Townsend ,ed.,1991 published by McGraw-hill
[4] Riddhish Thakore, Rajat Dave, Tejas Parsana, Amit Solanki “Six Sigma Implementation Practice in Manufacturing Industries”, Journal of Engineering Research and Applications Vol. 4, Issue 11(Version - 4), November 2014
[5] Celep Oguz , Yong-Woo Kim, John Hutchison , and Seungheon Han “Implementing Lean Six Sigma: A Case Study In Concrete Panel Production”, Proceedings for the 20th Annual Conference of the International Group for Lean Construction, August 2003
[6] Saad A.Shaikh , Javed Kazi “A Review on Six Sigma (DMAIC) Methodology”, International OPEN ACCESS Journal Of Modern Engineering Research (IJMER) Vol. 5 Iss.2 Feb. 2015
[7] Tushar N. Desai and Dr. R. L. Shrivastava “Six Sigma – A New Direction to Quality and Productivity Management”, Proceedings of the World Congress on Engineering and Computer Science 2008 WCECS 2008, October 22 - 24, 2008, San Francisco, USA
Paper ID: GRDJEV02I060075
Published in: Volume : 2, Issue : 6
Publication Date: 2017-06-01
Page(s): 82 - 87
Published in: Volume : 2, Issue : 6
Publication Date: 2017-06-01
Page(s): 82 - 87