Experimental Investigation on Strength Behaviour between GFRP & Steel Bars Reinforced in Columns

M. Priyashagadevan, Valliammai Engineering College; K. A. Kalaiarasi ,Valliammai Engineering College

Non-Corrosive Material, Compression Strength, Split Tensile Strength of GFRP Bars

Glass Fiber Reinforced Polymer (GFRP) is a composite material, which consist of polyester thermosetting resin as matrix and glass fibers as reinforcement. Pultrusion technique is used to fabricate GFRP products in various continuous forms of structural sections such as box, I-, H-, and plates, which are similar as steel sections. The use of GFRP member in structures is relatively becoming more important especially in constructions. It was observed that the current required technical and design data of pultruded GFRP sections was rather limited especially about material properties and structural performance. This study was conducted experimentally to investigate the physical and mechanical properties of the GFRP.
    [1] Afifi, M. Z., Mohamed, H., and Benmokrane, B., [2013a]. ―Axial Capacity of Circular Concrete Columns Reinforced with GFRP Bars and Spirals. ‖ Journal of Composites for Construction, in press. [2] American Concrete Institute (ACI) Committee 440, [2006]. Guide for the Design and Construction of Concrete Reinforced with FRP Bars, ACI 440.1R-06, Farmington Hills, Mich. [3] Issa, M. S., Metwally, I. M., and Elzeiny, S. M. [2011]. ―Structural Performance of Eccentrically Loaded GFRP Reinforced Concrete Columns. ‖ International Journal of Civil and Structural Engineering, 2(1), 395–404. [4] Lotfy, E. M. [2010]. ―Behavior of Reinforced Concrete Short Columns with Fiber Reinforced Polymers Bars.” International Journal of Civil and Structural Engineering, 1 (3), 545-557. [5] Mirmiran, A. and Shahawy, M., [1997]. "Behavior of Concrete Columns Confined by Fiber Composites." Journal of Structural Engineering, 123 (5), 583-590. [6] Zadeh, J. H., and Nanni, A. [2013]. ―Design of RC Columns using Glass FRP Reinforcement.‖ Journal of Composite for Construction, 17(3), 294-304.
Paper ID: GRDJEV02I050184
Published in: Volume : 2, Issue : 5
Publication Date: 2017-05-01
Page(s): 224 - 228