Electricity Generation using Railway Tracks
Bhakti Shashikant Shirke, Mahatma Gandhi Mission College of Engineering; Prof. Jagdish Chahande ,Mahatma Gandhi Mission College of Engineering; Vikas Goswami ,Mahatma Gandhi Mission College of Engineering; Adnan Ali Malnas ,Mahatma Gandhi Mission College of Engineering; Ganesh Zakane ,Mahatma Gandhi Mission College of Engineering
Energy Harvesting, Non-Conventional Method, Railway Tracks, Hydraulic Press Mechanism
Power Generation from railway tracks is an important concern in today’s life because its carries large number of trains moving over it. In this project an attempt is made to design a mechanism which able to carry load and generate power using Simple mechanical elements. This mechanism used hydraulic press and Chain drive mechanism to transmit power. The mechanism design in this project is Alternative way to store the energy which is generated using train when passes over the railway tracks with continuous power production process. This mechanism is has advantages of less in cost to manufacture and maintenance free and requires less space to install it.
-
[1] Aniket Mishra, Pratik Kale, Atul Kambl, “Electricity Generation from Railway Tracks”, The International Journal Of Engineering And Science, 2013, Volume 2, Issue 11,pp.25-27,ISSN:2319-1813,www.theijes.com.
[2] Piyush Bhagdikar, Shubham Gupta, Navneet Rana, R. Jegadeeshwaran, “Generation of electricity with the use of railway tracks”, “International Journal of Advances in Engineering & Technology”, 2014, Vol. 7, Issue 2, pp. 589-595, ISSN: 2231196
[3] G.Ramakrishna Prabu, G.Ethiraj, “Electricity Generation by railway tracks”, “International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering May 2015, Vol. 4, Issue 5, ISSN (Online): 2278 – 8875.
[4] Amanpreet Kaur, Shivansh Kumar Singh, Rajneesh, Parwez, Shashank, “Power Generation Using Speed Breaker with Auto Street Light”, “International Journal of Engineering Science and Innovative Technology”, March 2013, Vol. 2, Issue 2, ISSN: 2319-5967.
[5] Jyoti Maurya, Pooja Gupta, Pooja Gupta, Tarannum Shahab,Amitabh Srivastava, “Generation of Electricity through Speed Breaker Mechanism”, “International
[6] B. Santosh Sarma, V. Jyothi, D. Sudhir, “Design of Power Generation Unit Using Roller Mechanism”, IOSR Journal of Electrical and Electronics Engineering, May-June 2014, Vol. 9, Issue 3, pp. 55-60, ISSN: 2278-1676, www.iosrjournals.org.
Paper ID: GRDJEV02I050164
Published in: Volume : 2, Issue : 5
Publication Date: 2017-05-01
Page(s): 195 - 199
Published in: Volume : 2, Issue : 5
Publication Date: 2017-05-01
Page(s): 195 - 199