Experimental Comparison of Heat Transfer in a Down Flow Louvered Fin Auto Radiator using Water, Water and Ethylene Glycol Mixture & Water, Ethylene Glycol and Sugarcane Juice Mixture as Coolants

Swagath. V. Mohan, MA College of Engineering, Kothamangalam; Prof. Jacob Kuriakose ,MA College of Engineering, Kothamangalam; Nidhin A R ,MA College of Engineering, Kothamangalam; Binu Varghese ,MA College of Engineering, Kothamangalam; Feizal Fidus ,MA College of Engineering, Kothamangalam

CFD, Ethylene Glycol (EG), Sugarcane Juice

This study is focused on searching for alternative coolants to improve overall performance of the radiator. To enhance the cooling rate, increasing the surface area by addition of fins was the earliest approach but this approach of increasing heat transfer already reached its limit. Water and water mixed with anti-freezing agents such as ethylene glycol (EG) and propylene glycol (PG) are the traditional coolants for automotive radiator. Recently nano fluid have been proposed as coolant for automotive radiator. However, operation and long term stability are major challenges for nano fluid. Hence, the search for alternative coolant is not ending. Sugar cane juice, which has very similar freezing and boiling points with water, may be used as an alternative coolant. A study is conducted using sugar cane juice, ethylene glycol and water as coolants, CFD as well as experimental analysis is also done.
    [1] Rashmi Rekha SAHOO, Pradyumna GHOSH, Jahar SARKAR, Performance comparison of various coolants for louvered fin tube automotive radiator International Journal of Heat and Mass Transfer Volume 105, Pages 1-846 (February 2017) [2] Datta N. Mehtre, Sandeep S. Kore, Experimental Analysis of Heat Transfer from Car Radiator Using Nano fluids International journal of Mechanical engineering and computer applications vol2, issue 4 July-August 2014 [3] D. Bohne, S. Fischer, and E. Obermeier, Thermal Conductivity, Density, Viscosity, and Prandtl-Numbers of Ethylene Glycol-Water Mixtures Institut fur Fluid- und Thermodynamik, Universitat - GH Siegen, Paul-Bonatz-StraRe 9 - 11, D-5900 Siegen, Federal Republic of Germany [4] G.N. Tiwari, Sanjeev Kumar & Om Prakash, Study of heat and mass transfer from sugarcane juice for evaporation ELSEVIER Desalination 159 (2003) 81-96 [5] S.N. Sridhara, S.R. Shankapal and V. Umesh Babu, CFD analysis of fluid flow and heat transfer in a single tube-fin arrangement of an automotive radiator International Conference on Mechanical Engineering 2005 (ICME2005) 28- 30 December 2005, Dhaka, Bangladesh ICME05-FL-24 [6] Zailer Astolfi-Filho, Eduardo Basílio de Oliveira, Jane Sélia dos Reis Coimbra & Javier Telis-Romero, Friction factors, convective heat transfer coefficients and the Colburn analogy for industrial sugarcane juices ELSEVIER Biochemical Engineering Journal 60(2012) 111-118 [7] Sang Hyuk Lee, Nahmkeon Hur and Seongwon Kang, An efficient method to predict the heat transfer performance of a louver fin radiator in an automotive power system Springer Journal of Mechanical Science and Technology 28 (1) (2014) 145~155 August 6, (2013)
Paper ID: GRDJEV02I050133
Published in: Volume : 2, Issue : 5
Publication Date: 2017-05-01
Page(s): 215 - 223