Dynamic Value Stream Mapping in the Realm of Green Manufacturing
P Vikraman , Swami Nithyananda Polytechnic College Kanhangad; Sanoop Kumar P ,Govt. College of Engg Kannur
Lean Manufacturing,VSM,Simulation,Dynamic Value Stream Mapping,Green Manufacturing.
Value stream mapping is a lean tool which is used in lean manufacturing to find the flow of information and material, as a product it makes way through value stream. These envision tool helps to understand processes by using of stream lined work process. In these paper value stream maps of a process by using simulation is developed. By creating dynamic value stream maps makes it possible to analyze and optimize more complex systems than traditional VSM. Simulation can be used with value stream mapping to give it power and flexibility in order to dynamically change the state of the system. The study is conducted in milk processing plant, in particular a company who manufacture dairy based products. The aim is to identify extent of waste and how these can be reduced and/or eliminated from the value stream and consequently promoting Green Manufacturing. The benefits are visualized with the help of simulation which can reap long term yield for the manufacturers.
-
I.D.Paula, G.P.Bholeb, J.R.Chaudhari,“A review on Green Manufacturing: It’s important, Methodology and its Application”. Procedia Materials Science ,pp.1644 – 1649,2014.
[2] Lai, K.H., Lun, Y.H.V., Wong, C.W.Y., Cheng, “Green shipping practices in the shipping industry: conceputualization, adoption and implications”. Resources Conservation and Recycling,vol.55,pp.559–566,2011.
[3] J.P.Womack, D.T Jones, “Lean thinking: banish waste and create wealth in your corporation”, Simon & Schuster, New York,1996.
[4] M.Rother and J Shook, “Learning to see: value stream mapping to add value and eliminate MUDA”,The Lean Enterprise. Institute,Brookline, MA,1999.
[5] Y.Monden, “Toyota Production System: An Integrated Approach to Just-in- Time”, 2nd edition, Industrial Engineering and Management Press, 1993.
[6] D.T.Jones,P.Hines,N.Rich,“The seven value stream mapping tools”, International Journal of Operations & Production Management,vol.17,pp. 46–64,1997.
[7] J.Narasimhan,L.Parthasarathy and P.S.Narayan,“ Increasing the effectiveness of value stream mapping using simulation tools in engine test operations”,IASTED International Conference on Modelling and Simulation,pp. 260-264,2007.
[8] A. Melvin and D.Baglee, “Value stream mapping: A dairy industry prospective”,IEEE International, Engineering Management Conference,pp. 1 – 5, 2008.
[9] D.Seth,N.Seth and D.Goel, “Application of value stream mapping(VSM) for minimization of wastes in the processing side of supply chain of cottonseed oil industry in Indian context”, Journal of Manufacturing Technology Management,vol.19,pp. 529–550,2008.
[10] Ana Julia Dal Forno,Fernando Augusto Pereira ,Fernando Antonio Forcellini and Liane M Kipper,“Value Stream Mapping: a study about the problems and challenges found in the literature from the past 15 years about application of Lean tools”, International Journal of Advanced Manufacturing Technology, vol. 72, pp. 779-790, 2014.
[11] Bhim Singh,K Suresh Garg and K Surender. Sharma, “Value stream mapping: literature review and implications for Indian industry”. International Journal Advanced Manufacturing and Technology,vol.53,pp.799–809,2011
[12] D.H.Taylor, “Value chain analysis: an approach to supply chain improvement in agri-food chains”,International Journal of Physical Distribution and Logistics Management ,vol.35(10),pp. 744–761,2005.
[13] M.BragliA,G.Carmignani and F.Zammori, “A new value stream mapping approach for complex production systems”, International Journal of Production Research,vol.44(18),pp. 3929–3952,2006.
[14] G Tamizharasi and S Kathiresan,“Optimizing Maintenance and Repair Policies by Reliability Modelling”, Middle-East Journal of Scientific Research, vol. 18 (12), pp. 1695-1699, 2013.
[15] F.A,Abdulmalek and J.Rajgopal, “Analyzing the benefits of lean manufacturing and value stream mapping via simulation: A process sector case study”, International Journal of Production Economics vol.107, pp. 223–236,2007.
[16] Vijay Dhandapani, Andrew Potter and Mohamed Naim, “Applying lean thinking: a case study of an Indian steel plant”, International Journal of Logistics: Research and Applications, Vol. 7, pp. 239-250, 2004.
Paper ID: GRDJEV02I030029
Published in: Volume : 2, Issue : 3
Publication Date: 2017-03-01
Page(s): 4 - 9
Published in: Volume : 2, Issue : 3
Publication Date: 2017-03-01
Page(s): 4 - 9