Outrigger and Belt Truss System for Tall Building to Control Deflection: A Review

Author(s):

Akshay Khanorkar, Yeshwantrao Chavan Collage of Engineering, Nagpur; Shruti Sukhdeve ,Yeshwantrao Chavan Collage of Engineering, Nagpur; S. V. Denge ,JSSL, Mumbai; S. P. Raut ,Yeshwantrao Chavan Collage of Engineering, Nagpur

Keywords

Tall Building, Outrigger, Belt Truss, Optimum Position, Lateral Displacement, Storey Drift

Abstract

Accumulation of growing population especially in developing countries has resulted in an increased height of buildings, this need creating impact on structural development of tall building. As building increases in height there is effect of wind and earthquake forces, to increase stiffness of building against lateral load additional structural system such as belt truss and outriggers is required. This paper presents the review of various techniques and methods used to investigate uses of belt truss and outrigger system in a tall building. The various parameters like lateral displacement, storey drift, core moment and optimum position related to outrigger and belt truss are reviewed. The reviewed approach for the design and development of tall building using outrigger and belt truss is useful to provide a potential solution. The study in turn is useful for various research persons involved in design the tall buildings by using outrigger and belt truss system.

Reference

[1] Council on Tall Building and Urban Habitat, www.ctbuh.org [2] Ali sherif s. rizk (2010) Structural design of reinforced concrete tall buildings, CTBHU Journal, Issue 1, 43-41. [3] Mir M. Ali, Kyoung Sun Moon (2007) Structural developments in tall buildings: Current trends and future prospects, Architectural Science Review, Volume 50, No. 3, 205-223. [4] Subhashini S. Ramteke, Dr. S. P. Raut (2015) Pushover analysis and seismic retrofitting using shear walls and bracing system of frame structure, International Journal of Modern Trends In Engineering and Research, Volume 02, Issue 04,50-59. [5] O. Esmaili S. Epackachi M. Samadzad and S.R. Mirghaderi (2008) Study of structural RC shear wall system in a 56-story RC tall building, The 14th World Conference on Earthquake Engineering, Beijing, China [6] Shi Qingxuan, Yang Kun, Men Jinjie, Wang Qiuwei (2008) Review of seismic research and application of concrete core walls in high-rise buildings, The 14th World Conference on Earthquake Engineering, Beijing, China. [7] Kyoung Sun Moon (2015) Structural design and construction of complex-shaped tall buildings, International Journal of Engineering and Technology, Volume 7, No. 1,30-35. [8] S. Fawzia, A. Nasir, T. Fatima (2011) Study of effectiveness of outrigger system for high rise composite buildings for cyclonic region, World Academy of Science Engineering and Technology, volume 5, 12-29. [9] J. Kim, Y. Jun and J. Park (2010) Performance of building structures with outrigger trusses subjected to loss of a column, 2nd Specialty Conference on Disaster Mitigation, Winnipeg, Manitoba. [10] Kwangryang Chung, Wonil Sunu (2015) Outrigger systems for tall buildings in Korea, International General Of High-Rise Buildings, Volume 4, No. 3, 209-217. [11] Jaehong Lee, Minsik Bang, Jae-Yeol Kim (2008) an Analytical model for high-rise wall-frame structures with outriggers, The Structural Design of Tall and Special Buildings, 17, 839–851. [12] Kiran Kamath, Avinash A. R., Sandesh Upadhyaya K.(2013) A study on the performance of multi-outrigger structure subjected to seismic loads, IOSR Journal of Mechanical and Civil Engineering, 27-32. [13] Kiran Kamath, N. Divya, Asha U Rao (2012) A study on static and dynamic behavior of outrigger structural system for tall buildings, Bonfring International Journal of Industrial Engineering and Management Science, Volume 2, No. 4, 15-20. [14] S. Fawzia and T. Fatima (2010) Deflection control in composite building by using belt truss and outriggers systems, World Academy of Science, Engineering and Technology, Volume 4, 12-22. [15] Po Seng Kian, Frits Torang Siahaan (2001) The use of outrigger and belt truss system for high-rise concrete buildings, Dimensi Teknik Sipil, Volume 3, No. 1, 36-41. [16] P.M.B. Raj Kiran Nanduri, B.Suresh, MD. Ihtesham Hussain (2013) Optimum position of outrigger system for high-rise reinforced concrete buildings under wind and earthquake loadings, American Journal of Engineering Research, Volume-02, Issue-08, 76-89. [17] Nair R. S. (1998) Belt trusses and basements as virtual outriggers for tall buildings, Engineering Journal AISC, Fourth Quarter, 140-146. [18] N. Herath, N. Haritos, T. Ngo & P. Mendis (2009) Behavior of outrigger beams in high rise buildings under earthquake loads, Australian Earthquake Engineering Society Conference. [19] Abdul Karim Mulla, Srinivas B. N (2015) A study on outrigger system in a tall RC structure with steel bracing, International Journal of Engineering Research & Technology, Volume 4, Issue 07, 551-557. [20] Mohd Irfan Moinuddin, MohdAfroz Khan (2010) Structural design of reinforced concrete tall buildings, International Journal of Advanced Trends in Computer Science and Engineering, Volume 2, No.1, 628 – 633. [21] Shivacharan K, Chandrakala S, Narayana G, Karthik N (2015) Analysis of outrigger system for tall vertical irregularities structures subjected to lateral loads, IJRET, Volume 04, Issue 05, 84-88. [22] Krunal Z. Mistry, Proff. Dhruti J. Dhyani (2015) Optimum outrigger location in outrigger structural system for high rise building, International Journal of Advance Engineering and Research Development, Volume 2, Issue 5, 266-275. [23] Roslida Abd. Samat, Nasly Mohd. Ali, Abdul Kadir Marsono (2008) The optimum location of outrigger in reducing the along-wind and across-wind responses of tall buildings, Malaysian Journal of Civil Engineering, 20(2), 223 – 241. [24] Abbas Haghollahi, Mohsen Besharat Ferdous, Mehdi Kasiri (2012) Optimization of outrigger locations in steel tall buildings subjected to earthquake loads, The 15th World Conference on Earthquake Engineering, Lisboa. [25] Gerasimidis S., Efthymiou E. & Baniotopoulos C., (2009) Optimum outrigger locations of high-rise steel buildings for wind Loading, EACWE 5 Florence, Italy. [26] RaduHulea, Bianca Parv, Monica Nicoreac, Bogdan Petrina (2014) Optimum design of outrigger and belt truss systems using genetic algorithm, Journal of Civil Engineering and Architecture, Volume 8, No. 6, 709-715. [27] Z. Bayati, M. Mahdikhani and A. Rahaei (2008) Optimized use of multi-outriggers system to stiffen tall buildings, The 14th World Conference on Earthquake Engineering, Beijing, China. [28] T. A. Sakr, Hanaa E. Abd-El- Mottaleb (2014) Parameters affecting the elasto-plastic behavior of outrigger braced walls to earthquakes, International Journal of Civil, Environmental, Structural, Construction and Architectural Engineering Volume 8, No. 07, 707-893. [29] MSc. Rafael Shehu (2015) Ductility of outrigger typologies for highrise structures, Journal of Mechanical and Civil Engineering, Volume 12, Issue 2, 34-41. [30] J.C.D. Hoenderkamp (2011) Preliminary design of high-rise shear wall with outriggers and basement fin walls on non-rigid foundation, 36th Conference on Our World in Concrete & Structures, Singapore. [31] Mohd Abdus Sattar, Sanjeev Rao, Madan Mohan, Dr. Sreenatha Reddy (2014) Deflection control in high rise building using belt truss and outrigger systems, International Journal of Applied Sciences, Engineering and Management, Volume 03, No. 06, 44 – 53. [32] M. R. Jahanshahi, R. Rahgozar, M. Malekinejad (2012) A simple approach to static analysis of tall buildings with a combined tube-in tube and outrigger-belt truss system subjected to lateral loading, IJE, Volume 25, No. 3, 289-299. [33] Reza Rahgozar, Ali Reza Ahmadi, Yasser Sharifi (2010) A study for the optimum location of outriggers for high-rise concrete buildings, Applied Mathematical Modeling, 2437–2451. [34] M. Nicoreac, J.C.D. Hoenderkamp (2012) Periods of vibration of braced frames with outriggers, Procedia Engineering 40, 298 – 303. [35] Ahsan Mohammed Khan, K. Mythili, Shaik Subhani Shareef (2014) Response of lateral system in high rise building under seismic loads, International Journal of Research and Innovation, Volume I, Issue II, 8-14. [36] M. R. Jahanshahi, R. Rahgozar (2013) Optimum location of outrigger-belt truss in tall buildings based on maximization of the belt truss strain energy, International Journal of Applied Sciences, Engineering and Management, IJE Transactions A: Basics Volume 26, No. 7, 693-700. [37] Pudjisuryadi, P., Lumantarna, B., Tandya, H., and Loka (2012) Ductility of a 60-story shearwall frame-belt truss (virtual outrigger) building, Civil Engineering Dimension, Volume 14, No. 1, 19-25. [38] Y. Zhou, S.M. Lin, C.X. Wu & X.S. Deng (2015) Analysis of high-rise building with energy-dissipation story system, The 15th World Conference on Earthquake Engineering, LISBOA. [39] Eltobgy, H. H., Nabil, A., Bakhoum, M. M. (2013) Effect of Belt Truss Systems on the Enhancement of Progressive Collapse of Steel Buildings, The Third International Conference on Sustainable Construction Materials and Technologies, Kyoto, Japan

Other Details

Paper ID: GRDJEV01I060007
Published in: Volume : 1, Issue : 6
Publication Date: 2016-06-01
Page(s): 6 - 15

Article Preview

Download Google Scholar