- For Authors
- For Reviewers
Jenkins Hexley Dhas S, Noorul Islam Centre for Higher Education; Edwin Raja Dhas J ,Noorul Islam Centre for Higher Education
|Composite, Casting, Tensile Strength, Hardness, X ray Diffraction|
Composite plays a vital role in material science especially in the field of aerospace, marine, automobile, military and structural applications. It consists of two or more physically and chemically distinct phases. The composite has hybrid characteristics than those of individual components. Metal Matrix Composites (MMC) is those which are based on metals as matrix. Usually the reinforcing component is distributed in the continuous or matrix component. MMC focuses mainly on a relatively high strength and wear resistance applications. Aluminium Matrix Composites (AMC) is one in which Aluminium is the matrix and it has the property of high strength to weight ratio. The purpose of the work is to process and to determine the mechanical properties of AA2219-TiCp.Aluminum Matrix reinforced with TiCp composite was produced using modified stir casting process. Five different weight % of TiCp addition were performed without defects. The weight fractions used were 3%, 4%, 5%, 6%, 7%. The colour optical graphs, XRD, EDX analysis revealed the presence of TiC in the cast AMC. Tensile test, micro-hardness test shows the clear indication of considerable increase in Ultimate Tensile Strength(UTS) when the percentage of TiCp addition was increased.
 Ajay Singh, Love Kumar, Mohit Chaudhary, Om Narayan, PallavSharma, Piyush Singh, Bhaskar Chandra Kandpal, Som Ashutosh, (2013),Manufacturing of AMMCs using stir casting process and testing its mechanical properties, International Journal of Advanced Engineering Technology;vol. Iv,(No.iii),pp. 26-29.  Balasivanandha Prabu S , Karunamoorthy L , Kathiresan S ,Mohan B,(2006),Influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite, Journal of Materials Processing Technology (No.171), pp.268-273.  Belete Sirahbizu Yigezu, D. Venkateswarlu, M.M. Mahapatra, P.K. Jha, N.R. Mandal, (2014), On friction stir butt welding of Al + 12Si/10 wt% TiC in situ composite, Materials & Design, Vol.54,pp.1019-1027.  Bharath V, Mahadev Nagaral, Auradi.V, (2012),Preparation, characterization and mechanical properties of Al2O3 reinforced 6061Al particulate MMC’s, International Journal of Engineering Research and Technology,(No. 1),pp.1-6.  Boon peng chang, Hazizan Md Akil, Ramdziah Bt Nasir,Abbas Khann , (2015),Optimization on wear performance of UHMWPE composites using response surface methodology , Tribology International,No. 88,pp. 252-262.  Gopalakrishnan S, Murugan N (2012),Production and wear characterization of AA6061 matrix titanium carbide particulate reinforced composite by enhanced stir casting method ,Composite part B; vo.l43,pp.302-308.  Malek Ali, Fadhel M.I, Alghoul M.A, Zaharim A, Sopian K,(2012),Synthesis and characterization of aluminum matrix composites reinforced with various ratio of TiC for light devices, International Journal of Models and Methods in Applied Science,pp.169-174.  Mallesh G, Manjunatha H. S, Pradeep Kumar V. G, Rakesh D. R,(2015),Mechanical and tribiological properties of aluminium A16061 alloy reinforced with SiCp, International Journal of Emerging Technology and Advanced Engineering Technology,vol. 5,pp.111-117.  Mohsen Barmouz, Mohammad Kazem Besharati Givi,(2011),Fabrication of in situ Cu/SiC composites using multi-pass friction stir processing: Evaluation of microstructural, porosity, mechanical and electrical behavior Composites Part A: Applied Science and Manufacturing, Vol.42(No.10),pp.1445- 1453.  Nami, H. Adgi, M. Sharifitabar, H. Shamabadi, (2011), Microstructure and mechanical properties of friction stir welded Al/Mg2Si metal matrix cast composite, Materials & Design, Vol.32(No. 2), pp.976-983.  Pardeep Sharma, Dinesh Khanduja, Satpal Sharma,(2015),Dry sliding wear investigation of Al6082/Gr metal matrix composites by response surface methodology ,Journal of Materials Research and Technology,  Rajeshkumar Gangaram Bhandare, Parshuram M. Sonawane,(2014),Preparation of aluminium matrix composite by using stir casting method and it’s characterization, International Journal of Current Engineering and Technology; (no.3),pp.148-155.  Ramesh D, Swamy R.P , Chandrashekar T.k , (2010),Effect of weight percentage on mechanical properties of frit particulate reinforced Al6061 composite , Journal of Engineering And Applied Sciences;Vol.5(No.1),pp. 32-36.  Shubham Mathur, Alok Barnawal , (2013),Effect of process parameter of stir casting on metal matrix composites, International Journal of Science and Research; Vol.2,pp.395-398.  Siddesh Kumar N.G, Ravindranath V.M, Shiva Shankar G.S , (2014),Mechanical and wear behavior of aluminum metal matrix hybrid composite, Procedia Materials Science; Vol.5,pp. 908 -917.  Surya Sulaiman, Shamsuddin Sulaiman, Nur najmiyah Jaafar , Nor imrah Yusoff, (2014),Studies on tensile properties of titanium carbide (TiC) particulates composites Journal of Advanced Materials Research ; Vol.903,pp. 151-156.
Paper ID: GRDCF002010|
Published in: Conference : International Conference on Innovations in Engineering and Technology (ICIET) - 2016
Page(s): 24 - 30