Publication for Volume-3 Issue-10, September 2018
Aiming at the complex modal characteristic of the frame of the light electric sanitation vehicle under various working conditions, the finite element method is used to study the natural frequency and modal shape cloud diagram. Based on the frame model established in the three-dimensional software, the model characteristic is analyzed, the natural frequency and modal shape of the first five orders of mode are obtained, and their influences on vehicle travel are analyzed. The frame is improved, and the influence of the improved frame on the natural frequency and modal shape are analyzed. The results show that the bending and torsion resistance of the improved frame is ameliorated. Compared with the torsion resistance, the bending resistance of the frame is much ameliorated, which lays a foundation for the relative experiment, dynamics analysis and structural improvement of the frame.
Keywords : Electric Sanitation Vehicle, Modal Analysis, Frame, Finite Element Analysis
 Feng Jinzhi, Deng JiangBo, Zheng SongLin, Li Yuan. Design method of car subframe based on material replacement. Automotive Engineering, 2016, 38(6): 778-782.  Li Weifeng, Zhu Maotao, Lu Feng, Chen Yazhou. Case study on modal analysis of subframe of a SUV car. Noise and Vibration Control, 2013, 33(3): 124-127.  Li Guojun. Analysis of dump truck frame finite element modal. Equipment Manufacturing Technology, 2014, 12: 118-119.  Wang Huiyun, Lv baozhan, Zhu Sihong. Modal analysis of Light-truck frame based on ANSYS. Coal Mine Machinery, 2007, 28(3): 59-61.  Wu Haibo, Li Jin, Shi Leilei.Finite element modeling and modal analysis of light truck frame. High & Automotive Applications, 2012, 51(4): 17-19.  Li Weifeng, Zhu Maotao, Lu Feng, Chen Yazhou. Case study on modal analysis of the subframe of a SUV car. Noise and Vibration Control, 2013, 33(3): 124-127.  Zhao Jianzhong, Zhang Ruikun, Song Yangyiong, Chen Yong. Structure intensity and modal analysis of a SUV rear sub-frame. Mechanical Engineering & Automation, 2016(4): 48-50.  Ouyang Tiancheng, Wei Qifeng, Huang Jincheng. The modal analysis and optimization on heavy truck frame. Equipment Manufacturing Technology, 2012(4):19-21.  Yin Andong, Gong Laizhi, Wang Huan, Xu Junbo. Finite element analysis of electric vehicle frame based on HyperWorks. Journal of hefei University of Technology, 2014, 37(1):6-9+77
In spite of the fact that investigation into the plan of action has gotten expanding consideration, few examinations have so far been led on plan of action advancement in a global setting. The reason for the examination is to recognize diﬀerent examples of plan of action development which empowers worldwide retailers to reconstruct their center business rationale in new host nations. Based on looking into the plan of action changes of 15 universal retailers from different home nations to one single host nation (China), our investigation gives an inside and out comprehension of plan of action development with regards to global business. By taking a gander at the ﬁrms abilities in revamping their center rationale in the setting of a host nation, we uncover six courses of retail plan of action advancement. Using the focal point of authoritative learning hypothesis and internationalization, we distinguish three examples of asset arrangement by universal organizations during the time spent creating plan of action developments. Our investigation, thus the, gives experiences and direction to multinational organizations when all is said in done, universal retailers specifically, with respect to how to effectively adjust their plan of action from home nation to have nation.
Keywords : Global Setting, Global Business, Revamping, Multinational, Internationalization
 Eriksson, K., Johanson, J., Majkga°rd, A., & Sharma, D. D. (1997). Experiential knowledge and cost in the internationalization process. Journal of International Business Studies, 28(2), 337–360.  Fang, Y., Wade, M., Delios, A., & Beamish, P. W. (2013). An exploration of multinational enterprise knowledge resources and foreign subsidiary performance. Journal of World Business, 48(1), 30–38.  Forsgren, M. (2016). A note on the revisited Uppsala internationalization process model – The implications of business networks and entrepreneurship. Journal of International Business Studies, 47(9), 1135–1144.  Frost, T. S. (2001). The geographic sources of foreign subsidiaries’ innovations. Strategic Management Journal, 22(2), 101–124.  Goldman, A. (1981). Transfer of a retailing technology into the less developed countries: The supermarket case. Journal of Retailing, 57(2), 5–29.  Hitt, M. A., Hoskisson, R. E., & Ireland, R. D. (1994). A mid-range theory of the interactive eﬀects of international and product diversiﬁcation on innovation and performance. Journal of Management, 20(2), 297–326.  Jansen, J. J. P., Van Den Bosch, F. A. J., & Volberda, H. W. (2006). Exploratory in- novation, exploitative innovation: And performance: Eﬀects of organizational ante- cedents and environmental moderators. Management Science, 52, 1661–1674.  Johanson, J., & Vahlne, J.-E. (1977). The internationalization process of the ﬁrm: A model of knowledge development and increasing foreign market commitments. Journal of International Business Studies, 8(1), 23–32.  Johanson, J., & Vahlne, J.-E. (2009). The Uppsala internationalization process model revisited: From liability of foreignness to liability of outsidership. Journal of International Business Studies, 40(9), 1411–1431.  Johnson, M. W., Christensen, C. M., & Kagermann, H. (2008). Reinventing your business model. (cover story). Harvard Business Review, 86(12), 50–59.  Kacker, M. (1988). International ﬂow of retailing know-how: Bridging the technology gap in distribution. Journal of Retailing, 64(1), 41–67.  Kindström, D. (2010). Towards a service-based business model −Key aspects for future competitive advantage. European Management Journal, 28(6), 479–490.  Koriat, A., Goldsmith, M., & Pansky, A. (2000). Toward a psychology of memory accu- racy. Annual Review of Psychology, 51, 481–537.  López Rodríguez, J., & García Rodríguez, R. M. (2005). Technology and export behaviour: A resource-based view approach. International Business Review, 14(5), 539–557.  Landau, C., Karna, A., & Sailer, M. (2016). Business model adaptation for emerging markets: A case study of a German automobile manufacturer in India. R&D Management, 46(3), 480–503.  Landry, R., Amara, N., & Lamari, M. (2002). Does social capital determine innovation? To what extent? Technological Forecasting & Social Change, 69, 681–701.  Lee, Y., Shin, J., & Park, Y. (2012). The changing pattern of SME's innovativeness through business model globalization. Technological Forecasting and Social Change, 79(5), 832–842.  Li, P. P. (2010). Toward a learning-based view of internationalization: The accelerated trajectories of cross-border learning for latecomers. Journal of International Management, 16(1), 43–59.  Machado-da-Silva, C. L., Casali, A. M., & Rocha Fernandes, B. H. (2001).  Internationalization and organizational change: A multi case study of brazilian or- ganizations. Latin American Business Review, 2(3/4), 61–96.  Magretta, J. (2002). Why business models matter. Harvard Business Review, 80(5), 86–92. March, J. G. (1991). Exploration and expoitation in organizational learning. OrganizationScience, 2(1), 71–87.  Markides, C. (2006). Disruptive innovation: In need of better theory. Journal of Product Innovation Management, 23(1), 19–25.  Martenson, R. (1987). Is standardisation of marketing feasible in culture bound in- dustries? A European case study. International Marketing Review, 4(3), 7–17.  Massa, S., & Testa, S. (2011). Beyond the conventional-specialty dichotomy in food re- tailing business models: An Italian case study. Journal of Retailing & Consumer Services, 18(5), 476–482.  Massa, L., Tucci, C. L., & Afuah, A. (2017). A critical assessment of business model re- search. Academy of Management Annals, 11(1), 73–104.  McGrath, R. G. (2010). Business models: A discovery driven approach. Long Range Planning, 43(2/3), 247–261.  Moingeon, B., & Lehmann-Ortega, L. (2010). Creation and implementation of a new business model: A disarming case study. M@n@gement, 13, 266–297.  Molero, J. (1998). Patterns of internationalization of Spanish innovatory ﬁrms. Research Policy, 27(5), 541–558.  Morris, M., Schindehutte, M., & Allen, J. (2005). The entrepreneur's business model: Toward a uniﬁed perspective. Journal of Business Research, 58(6), 726–735.  OECD (2005). The measurement of scientiﬁc and technological activities: Proposed guidelines for collecting and interpreting technological data.  Onetti, A., Zucchella, A., Jones, M., & McDougall-Covin, P. (2012). Internationalization, innovation and entrepreneurship: Business models for new technology-based ﬁrms. Journal of Management & Governance, 16(3), 337–368.  Osterwalder, A., Pigneur, Y., & Tucci, C. L. (2005). Clarifying business models: Origins, present: And future of the concept. Communications of the Association for Information Systems, 16, 1–25.  Pateli, A. G., & Giaglis, G. M. (2005). Technology innovation- induced business model change: A contingency approach. Journal of Organizational Change Management, 18(2), 167–183.  Rask, M. (2014). Internationalization through business model innovation: In search of relevant design dimensions and elements. Journal of International Entrepreneurship, 12(2), 146–161.  Reinartz, W., Dellaert, B., Kraﬀt, M., Kumar, V., & Varadarajan, R. (2011). Retailing in- novations in a globalizing retail market environment. Journal of Retailing, 87, S53–S66.  Rogers, M. (2004). Networks, ﬁrm size and innovation. Small Business Economics, 22(2), 141–153.  Roper, S., & Love, J. H. (2002). Innovation and export performance: Evidence from the UK and German manufacturing plants. Research Policy, 31(7), 1087–1102.  Schmid, S., & Kotulla, T. (2011). 50 years of research on international standardization and adaptation-From a systematic literature analysis to a theoretical framework.  International Business Review, 20(5), 491–507.  Schneider, S., & Spieth, P. (2013). Business model innovation towards an integrated future research agenda. International Journal of Innovation Management, 17(1), 1–34
In recent scenario of rapid urbanization and industrialization causes various changes in our natural resources like air, water, soil etc. Various problems are caused due to these changes such as drought, frequent floods, pollution, change in climate, loss of biodiversity, extinction of many varieties of flora and fauna, land use and land cover changes, degradation of land and many more. Various researches are carried out to on the topics to comate the impact of these physical changes regarding our natural resources. So there is need of reliable hydrological model which will give more compatible results with the observed parameters. It is not always true that a complex hydrological model give the more accurate output. So there was an argued that even the use of complex models does not provide better results. This paper is regarding various hydrological models, their classification and short description about them.
Keywords : Hydrology, Hydrological process, Hydrological models, Classification
 Abbott, M.B., Bathrust, J.C., Cunge, J.A., O'Connell, P.E. and Rasmussen, J., 1986b. An introduction to Europeen hydrological system - systeme hydrologique Europeen (SHE) Part 2. Structure of a physically based distributed modeling system. Journal of Hydrology 87, 61-77  Crawford, N.H. and R.K. Linsley, 1966. Digital Simulation in Hydrology: Stanford Watershed Model IV. Technical Report No. 39, Department of Civil Engineering, Stanford University, p. 210.  Devia, G.K., Ganasri, B.P. and Dwarakish, G.S., 2015. A review on hydrological models. Aquatic Procedia, 4, pp.1001-1007.  Ray, K., 1975. Hydrology for Engineers. McGraw Hill Kogakusha.  Sharma, K. D., Sorooshian, S. and Wheater, H., 2008. Hydrological Modelling in Arid and Semi-Arid Areas. New York: Cambridge University Press. 223 p. ISBN-13 978-0-511-37710-5.