Article

Forging Defects Analysis in Suspension Arm and Product Development

Author(s):

Mr. Jadhav Vijay Baban, Jspm'sBhagwant Institute of Technology, Barshi; Prof. Mundhe V. L ,Jspm'sBhagwant Institute of Technology, Barshi; Mr. Sabale Amol Dnyandeo ,Shree samarth polytechnic ; Mr. Walunj Abhimanyu Arjun ,Shree samarth polytechnic

Keywords

Suspension arm, billet length, forging process defects

Abstract

Forging process commonly used in industry and affected by the process defects like folds or laps, unfelling , cracks size variations prevalent in forging process. The Suspension arm are made by different material. The significant parameters such as stock size, cut length, cut weight, billet temperature. Forging defects of suspension Arm under different manufacturing condition successfully analysed by different total length of job and weight of job, rolled cross section job temperature of job

Reference

    [1] Vipan Chand and Dr.S.S. Sen (2014) “Forging Defects Analysis In Axle Shaft”, International Journal Of Advanced Technology In Engineering Science Volume No 02 Issue No 08. [2] Suraj Ashok (2015)” Designing a Forging Die for Connecting Rod” International Journal of Engineering Research and Application (IJERA) ISSN: 2248-9622. [3] Mahendra G. R. and Nilesh A.J (2014). “An overview of forging processes with their defects” International Journal of Scientific and Publication, Volume4 Issue 6. [4] Aju pius T. (2013) “Controlling Measures to Reduce Rejection Rate Due To Forging Defects” International Journal of Scientific and Publication, Volume3 Issue 3. [5] Chandna,P. and Chandra,A.(2009), “Quality tools to reduce crank shaft forging defects: an industrial case study”, Journal of Industrial and Systems Engineering,Vol.3No.1, pp. 27-37. [6] M.G.Rathi and N.A.Jakhade (2014), “An Effect of forging process parameters on filling the job weight::An industrial case study”, International Journal of scientific and Research Publications, Vol.4No6. [7] M.G.Rathi and N.A.Jakhade (2014), “An Overview of Forging Processes with their defects”, International Journal of scientific and Research Publications, Vol.4No6. [8] Mathew, C.,Koshy, J.and Verma, D.(2013),“Study of Forging Defects in Integral Axle Arms”, International Journal of Engineering and Innovative Technology, Vol.2No. 7, pp. 322-326. [9] Mr.Bhavesh V Patel1, Dr.Hemant R Thakkar2 Dec 2014 (Volume 1 Issue 7) Review of Analysis on Forging Defects for Quality Improvement in Forging Industries Journal of Emerging Technologies and Innovative Research (JETIR) JETIR (ISSN-2349-5162).

Other Details

Paper ID: GRDJEV03I010016
Published in: Volume : 3, Issue : 1
Publication Date: 2018-01-01
Page(s): 20 - 27

Article Preview

Download   Google Scholar