Passive Viscoelastic Constrained Layer Damping for Beams
G Selvakumar, Jay Shriram Group of Institutions; Sampathkumar N ,Jay Shriram Group of Institutions
Vibration, Damping,CLD, Length of Patch,Viscoelastic
Beam is basic components in industrial structural design whose damping properties are often very important to reduce vibration. Viscoelastic materials are generally polymers; there is enormous variability in the composition of viscoelastic materials. Rubber is a unique material that is both elastic and viscous. Rubber parts can therefore function as shock and vibration isolators and/or as dampers. In this research Butyl rubber is viscoelastic material which is acting as the damping layer, steel and aluminum patches are used as constrained layer. Here, change in length of patch and damping layer is varied for constant length and thickness of base layer. The lengths of patches are varied as 25%, 50%, 75% and 100%. These patches also arranged in segment and hybrid. Two sets of specimens are prepared for aluminium and steel constrained layer. Damping characteristics of beam are determined by experimental and analytically by using FFT analyzer and ANSYS software respectively.
-
[1] Amichi, K., Atalla, N., & Ruokolainen, R. (2010). A new 3D finite element sandwich plate for predicting the vibroacoustic response of laminated steel panels. Finite Elements in Analysis and Design, 46(12), pp. 1131-1145. Elsevier.
[2] Balamurugan, V., & Narayanan, S. (2002). Finite Element Formulation and ActiveVibration Control Study on Beams Using Smart Constrained Layer Damping (Scld) Treatment. Journal of Sound and Vibration, 249(2), pp. 227-250
[3] Castel, a., Loredo, a., El Hafidi, a., & Martin, B. (2012). Complex power distribution analysis in plates covered with passive constrained layer damping patches. Journal of Sound and Vibration, 331(11),PP. 2485-2498
[4] Dewangan, P. (2009). Passive Viscoelastic Constrained Layer Damping For Structural Application Passive Viscoelastic Constrained Layer. England: John Wiley and Sons, LTD.
[5] Gallimore, C. A. (2008). Passive Viscoelastic Constrained Layer Damping Application for a Small Aircraft Landing Gear System Passive Viscoelastic Constrained Layer Damping Application for a Small Aircraft Landing Gear System
[6] Havriliak, S. Negami S.(1967), A complex plane representation of dielectric and mechanical relaxation processes in some polymers, Polymer 8 .pp. 161–210.
[7] James Mark (2007) Physical Properties of Polymers Handbook, Springer.
[8] Jayasuriya, C. K., & Premachandra, J. K. (2006). CHAPTER 2 Names, Acronyms, Classes, and Structures of Some Important Polymers, (2), pp. 25-41.
[9] Jeric, K. M., Cudney, H. H., Inman, D. J., & Jeric, K. M. (1999a). An Experimental Evaluation of the Application of Smart Damping Materials for Reducing Structural Noise and Vibrations for Reducing Structural Noise and Vibrations.
[10] Johnson CD, et al. (1982) Finite element prediction of damping in structures with constrained viscoelastic layers. AIAA Journal; 20(9):pp. 1284-90.
[11] Jones, D. I. G.( 2001). Handbook of Viscoelastic Vibration Damping. West Sussex,
[12] Kumar, N., & Singh, S. P. (2009). Vibration and damping characteristics of beams with active constrained layer treatments under parametric variations. Materials & Design, 30(10), pp. 4162-4174.
[13] Lin, C.-Y., & Chen, L.-W. (2003). Dynamic stability of a rotating beam with a constrained damping layer. Journal of Sound and Vibration, 267(2),pp. 209-225.
[14] Shi, Y. M., Li, Z. F., Hua, H. X., Fu, Z. F., & Liu, T. X. (2001). The Modelling and Vibration Control of Beams with Active Constrained Layer Damping. Journal of Sound and Vibration, 245(5), pp. 785-800.
[15] Singiresu S.Rao. (2004), The finite element method in engineering ,Heinemann-Butterworth
[16] Sun, D., & Tong, L. (2002). Modelling and Vibration Control of Beams with Partially Debonded Active Constrained Layer Damping Patch. Journal of Sound and Vibration, 252(3), pp. 493-507.
[17] Van Vuure, a. ., Verpoest, I., & Ko, F. (2001). Sandwich-fabric panels as spacers in a constrained layer structural damping application. Composites Part B: Engineering, 32(1), pp. 11-19.
[18] Xie, Z., & Steve Shepard, W. (2009). Development of a single-layer finite element and a simplified finite element modeling approach for constrained layer damped structures. Finite Elements in Analysis and Design, 45(8-9), pp. 530-537.
[19] Zeytounian, Rk. (2001). A historical survey of some mathematical aspects of Newtonian fluid flows. Applied Mechanics Reviews, 54(6), pp. 525
Paper ID: GRDJEV02I120012
Published in: Volume : 2, Issue : 12
Publication Date: 2017-12-01
Page(s): 14 - 17
Published in: Volume : 2, Issue : 12
Publication Date: 2017-12-01
Page(s): 14 - 17