Optimization of Lathe Parameters for Minimum Surface Roughness and Maximum MRR

Ashish R.Rajpure, NBN Sinhgad School of Engineering; Yashraj N.Morde ,NBN Sinhgad School of Engineering; Sainand.M. Jadhav ,NBN Sinhgad School of Engineering; Ravikant K. Nanwatkar ,NBN Sinhgad School of Engineering; Dadaso D. Mohite ,Keystone School of Engineering, Pune

Lathe, Annova, Mathematical Modeling, MRR, Taguchi Method, Optimization

This paper theologies with the Taguchi technique for the optimization of lathe parameters on a cylindrical round workpiece of EN19 steel. In industry main objective is to have a good quality surface or to get a maximum material removal rate. The three significant parameters of lathe which are used are speed, feed and depth of cut. The number of experiments has been carried out using Taguchi’s orthogonal array in the design of experiments (DOE).Analysis of Variance is used to identify the effects of parameters on the workpiece. Roughness values are measured using a surface roughness meter. From experimental results the mathematical models were generated for the parameters.
    [1] D.Vishnu Vardhan Reddy, N. Jaya Krishna, N.Bhaskar,"Optimization of Cutting Parameters in Turning of En-19 by using Taguchi and Genetic Algorithm" International Journal of Engineering Research & Technology (IJERT) ISSN: 2278-0181 Vol. 5 Issue 01, January-2016. [2] Gaurav Chaudhary," Optimization Of Turning parameters by using taguchi method for optimum surface finish "International Journal of Mechanical And Production Engineering, ISSN: 2320-2092, Volume- 2, Issue- 5, May-2014. [3] Mustafa Gunaya,Emre Yucel "Application of Taguchi method for determining optimum surface roughness in turning of high alloy white cast iron" Measurement 46 (2013) 913–919. [4] Dadaso D. Mohite "An Investigation of Effect of Dressing Parameters for Minimum Surface Roughness using CNC Cylindrical Grinding Machine "International Journal of Research in Engineering and Applied Sciences (ISSN 2249-3905) VOLUME 6, ISSUE 6 (June, 2016) [5] Ashish Kabra" Study on Parametric Optimization & Modeling for Surface Roughness, Feed and Radial Force of EN-19/ANSI-4140 Steel in CNC Turning Using Taguchi and Regression Analysis Method" Journal of Engineering Research and Applications (IJERA) ISSN: 2248-9622 www.ijera.com Vol.3,Issue 1, January -February 2013, pp.1537-1544. [6] G.M.Sayeed Ahmed S. Sibghatullah Hussaini Quadri Md Sadiq Mohiuddin "Optimization of Feed and Radial Force in Turning Process by using Taguchi Design Approach" G.M. Sayeed Ahmed et al. / Materials Today: Proceedings 2 (2015) 3277 – 3285. [7] R. Nath Yadav, A Hybrid Approach of Taguchi-Response Surface Methodology for Modeling and Optimization of Duplex Turning Process, Measurement (2016). [8] D. Sai Chaitanya Kishore, , K. Prahlada Rao, A. Ramesh."Optimization of machining parameters for improving cutting force and surface roughness in turning of Al6061-TiC in-situ metal matrix composites by using Taguchi method". [9] Kant G, Sangwan KS, Prediction and optimization of machining parameters for minimizing power consumption and surface roughness in machining, Journal ofcleanerProduction(2014). [10] Bilga PS, Singh S, Kumar R, Optimization of energy consumption response parameters for turning operation using Taguchi method, Journal of Cleaner Production (2016). [11] Dinesh Kumar Kasdekar,Vishal Parashar2, Jasveer singh, M.K.Gour4 "Taguchi Method and ANOVA: An Approach for Selection of Process Parameters of EDM of EN-353 Steel"(ISSN 2250-2459, ISO 9001:2008 Certified Journal, Volume 4, Issue 6, June 2014). [12] Natarajan N Arunachalam RM," Optimization with micro EDM with multi performance characterstics using taguchi method and grey relational analysis" Journal of sci.Ind Research 2011;70:500-5.
Paper ID: GRDJEV02I050083
Published in: Volume : 2, Issue : 5
Publication Date: 2017-05-01
Page(s): 109 - 115