Adaptive FIR Filter Processing of Vibroarthrographic Signal

J. Prasad, Sri Ramakrishna Engineering College; B.Anusthika ,Sri Ramakrishna Engineering College; V.Dhivya ,Sri Ramakrishna Engineering College; D.Vyshali ,Sri Ramakrishna Engineering College

Vibroarthrography, LMS Adaptive Filter, MRI, CT, Cartilage, Accelerometer

The knee is one of the most important and injured site in human body. Current evaluation of the knee joint status are based on imaging such as CT and MRI, which are sensitive to knee joint disorders and expensive too, and others include the semi- invasive procedures. In order to overcome these problems a vibroarthrography is introduced. The aims of the present study were to investigate the most suitable location for vibroarthrography measurements of the knee joint to distinguish a healthy knee from knee osteoarthritis.Vibroarthrography appear as an innovative and non-invasive approach to solve this problem. Mechanical vibratory signals arising from the defected knee joint can be recorded recurring to a tiny accelerometer. Healthy cartilage is smooth and slippery, producing minimum vibration while deteriorated cartilage is more irregular, producing additional vibrations. Vibrations generated by the friction of deteriorated articular surfaces are different in terms of frequency and amplitude originating distinct and representative vibroarthrographic signals which allows the differentiation of a healthy and a pathological knee. In this work, the normal and pathological knee vibrations is acquired and processed by LMS Adaptive filter and its frequencies is obtained.
    [1] Jien-Chen Chen, Pi-Cheng Tung, Shih-Fong Huang, Shu-Wei Wu, Shih-Lin Lin and Kuo-Liang Tu, “Extraction and Screening of Knee Joint Vibroarthographic Signals Using Empirical Mode Decomposition Method”, International Journal of Innovative Computing, Information and Control Volume 9, Number 6, June 2013 ICIC International c2013 ISSN 1349-4198. [2] Dinis Benjamim Ferreira Moreira, “Classification of knee arthropathy with accelerometer-based vibroarthrography”, September, 2015. [3] Susumu Ota, RPT, , Akiko Ando, RPT, Yusuke Tozawa, Takuya Nakamu, Shogo Okamoto, Takenobu Sakai, Kazunori Hase, “Preliminary study of optimal measurement location on vibroarthrography for classification of patients with knee osteoarthritis”, The Journal of Physical Therapy Science 28: 2904–2908, 2016. [4] Divya, Preeti Singh, Rajesh Mehra (2013) “Performance Analysis of LMS & NLMS Algorithms for Noise Cancellation” International Journal of Scientific Research Engineering & Technology (IJSRET), Vol. 2, Issue.6, ISSN 2278 – 0882. [5] Jyoti dhiman, shadab ahmad and kuldeep gulia (2013)” Comparison between Adaptive filter Algorithms (LMS, NLMS and RLS)” International Journal of Science, Engineering and Technology Research (IJSETR), May 2013, Vol. 2, Issue. 5, ISSN: 2278 – 7798. [6] Nasser Kehtarnavaz and Namjin, Kim University of Texas at Dallas, “Digital Signal Processing System-Level Design Using LabVIEW” Copyright © 2005, Elsevier Inc. [7] Nishi Singh Patel, Sunil Kumar, Gagan Minocha “Design and implementation of LMS Adaptive Filter” International Journal of Advance Research in Science and Engineering, IJARSE, Vol. No. 2, Issue No. 5, May, 2013. [8] Biomedical Signal Analysis. [9] Biomedical Engineering Handbook.
Paper ID: GRDJEV02I050018
Published in: Volume : 2, Issue : 5
Publication Date: 2017-05-01
Page(s): 38 - 46