Paper On Design and Analysis Of Bending Furnace Using Alternative Fuels

RAMESH DEORAOJI BOKDE, VIDARBHA INSTITUTE OF TECHNOLOGY, NAGPUR; Vaibhav H. Bankar ,VIDARBHA INSTITUTE OF TECHNOLOGY, NAGPUR

FURNACE WALL, TRANSIENT HEAT TRANSFER, LDO, COAL, LPG, INSULATION.

The aspect of heat transfer which in itself requires an elaborate model is considered here. Taken Into account are the convection and radiation between gas and brick wall, and the conduction from bricks to light diesel oil as a fuel used in this paper. by taking minimum heat loss rate (HLR) as optimization objective. Two boundary conditions of the insulation layers, convective heat transfer and combined convective and radioactive heat transfer, are taken into account. The optimal constructs of the insulation layers with the two boundary conditions are obtained. Improvement of energy efficiency of the most consuming facilities was achieved by improving the use of alternative energy minimization such as reducing the heat lost of hot gases, minimizing the heat radiated through refractory linings of metallurgical furnaces.
    [1] S. Lorente, Heat losses through building walls with closed, open and deformable cavities, Int. J. Energy Res. 26 (7) (2002) 611–632. [2] O. Kaynakli, A review of the economical and optimum thermal insulation thickness for building applications, Renew. Sustain. Energy Rev. 16 (1) (2012) 415–425. [3] H. Ali, P. Lynn, C. Zhang, A. Nathaniel, X. Li, F. Shang Guan, Comparison of iron and steel production energy use and energy intensity in China and the U.S., J. Clean. Prod. 65 (15) (2014) 108–119. [4] D. Laha, P.N. Suganthan, Y. Ren, Modeling of steelmaking process with effective machine learning techniques, Expert Syst. Appl. 42 (2015) 4687–4696. [5] Cone, Energy Management for Industrial Furnaces, Wiley, New York, 1980. [6] Coal and Industrial Furnaces – Department of Coal Publications, Government of India. [7] H.L. Lee, W.L. Chen, W.J. Chang, E.J. Wei, Y.C. Yang, Analysis of dual-phase-lag heat conduction in short-pulse laser heating of metals with a hybrid method, Appl. Therm. Eng. 52 (2013) 275–283. [8] Z. Li X, Z.Y. Guo, Field Synergy Theory for Convective Heat Transfer Optimization, Science Press, Beijing, 2010. [9] R.S Khurmi & J.K Gupta , A Textbook Of Thermal Engineering.
Paper ID: GRDJEV01I070087
Published in: Volume : 1, Issue : 7
Publication Date: 2016-07-01
Page(s): 64 - 77